System characteristics HYDROVAC:
- Environmental friendly aqueous cleaning agents (non toxic, solvent-free)
- No danger of explosion and fire
- Reduction of cleaning time and improvement of cleaning quality by use of TURBOCLEANŪ (vacuum cleaning). Decrease of boiling point through low pressure causes creation of tiny bubbles. Additional injection of air increases the mechanical cleaning effect. Rising bubbles sweep adherent contamination offthe workpiece. Continuous feeding of fresh cleaning media maintained on the partīs surface.
- Reduction of drying time due to combined drying (alternating sequences of vacuum-and circulating air drying)
- Entirely dry parts even for complex geometries, such as pocket hole drillings
- Pressure-induced flux and vacuum-induced flux possible
- Low water consumption by condensation of vapor
- All parts in touch with media are made of stainless steel, unit is completely encased
- Integrable in production and manufacturing lines or as stand-alone solution
- 3 separate media tanks (cleaning, rinsing 1, rinsing 2) with separate return pipes to prevent mixture of media
- Best water quality in tanks due to cascade refilling system, long bath operating life
- Cleaning and drying in one rotating working chamber
|
Nitriding units
